Banjo Dry-Mate

User Friendly

Operating Dry-Mate is simple.

The handles interlock making it easy to identify which handle opens or closes first. No guessing is involved! The two Dry-Mate halves couple together with cam levers for positive engagement.

Design

Dry-Mate is designed for safe and easy spill free connections. The "double ball" design allows maximum flow, while the cam lever style of connection is the most recognised coupling connector.

Features

• Available in Stainless Steel and Polypropylene
  
• Unrestricted flow
• Minimal fluid spillage
• Easy to use
• Economical
• Reduces risk of exposure
• Wide range of chemical resistance*
• Cannot be uncoupled in open position

*Not for low flash point liquids

Lockable Yoke to Prevent Accidental Spills

Dry-Mate uses a ball valve design giving an unrestricted path for fluid flow. The handles on each half interlock make it easy to identify which handle opens or closes first.

The cam lever style of connection is the most recognised type of connection available. This offers an easy, quick and positive connection of the coupling halves.

For safety the Dry-Mate has a number of features. Both handles have interlock buttons that prevent the ball valves from opening when the halves are separated. The Female part also has a locking yoke that locks the cam levers once the valve handle has been rotated to the open position.

The gasket, which seals between the two halves, is mechanically held in place to ensure that it remains located when the halves are disconnected.

Stainless Steel

Maximum Working Pressure: 100 PSI / 7 bar

Maximum Temperature: 65ºC at 70 PSI

Material: 316 Stainless Steel

Seals: 100% PTFE ball seats and seals

Face seal (that between the two halves) Viton, EPDM (Kalrez® available as an option)

Size Range: 1”, 11/2”, and 2”

End Connection: BSP or NPT Female

Polypropylene

Maximum Working Pressure: 100 PSI / 7 bar

Maximum Temperature: 65ºC at 70 PSI

Material: Fibreglass Reinforced Polypropylene

Seals: PTFE seats and Viton seals