SKU: BV-V150B-P

Banjo Standard Port Bolted Ball Valve

Contact us for a price

Banjo Polypropylene Bolted Ball Valves are created with precision moulded Polypropylene reinforced with fibreglass for additional strength. The valve opens and closes with very little pressure to the handle, while the PTFE self-lubricating stem bushings and seals cannot stick or bind. The ball is diamond turned after moulding to make it spherically perfect which provides precise contact between ball and seats, and the self-aligning feature allows the ball to move freely against the 100% PTFE seats for a smooth operation. Stainless steel bolts (4 bolt design), FKM (viton type) seals. Reduced bore.

  • Precision molded
  • PTFE seats for smooth operation and proper sealing
  • Self-lubricating stem bushings and seats

Further Information

Select further product information and downloads using the tabs

Description

Sizes: 4 Bolts : 1/2″ to 2″. 6 Bolts: 2″ to 4″. Banjo ball valves feature an interlocking body and end plate for an easy thread connection for use within agriculture and industrial liquid flow applicaitons. The bolted Banjo ball valve has an FKM (Viton) seal to handle most liquids, although viton is also available. The maximum operating presssures are 100 PSI to 225 PSI at 21C. Available with reduced bore or full bore. Please refer to the data sheets for the options available.

Special Features

Spherically perfect, self-aligning ball which provides precise contact between ball and seats, PTFE self-lubricating stem bushings and seats that cannot stick or bind.

Technical Table

Application

FAQs

Ball valves may be installed in vertical or horizontal pipe runs, they are bi-directional therefore flow direction is not critical, however the best practice is to set up the valve handle to point in the direction of flow whenever possible.

View all FAQs

Downloads

Banjo Standard Port Bolted Ball Valve Banjo Standard Port Bolted Ball Valve Download