Banjo Dry-Mate

Banjo Dry-Mate is one of the most cost effective dry disconnect fittings on the market and has been designed to be lightweight and easy to connect. Its unique ‘double ball’ design means the maximum flow can be achieved and the cam levers are an easy to operate mechanism that most operators will be familiar with. Depending on your application and what media you’re using Dry-Mate comes in a choice of materials, either polypropylene or stainless steel. Banjo Dry-Mate is safe, clean and spill free.

Filter by

Loading...

Showing 24 products

1 1/2" Banjo Full Port Union Ball Valve BSP PP

BV-UV150FP

£31.50



1 1/2" Banjo Standard Port Bolted Ball Valve BSP PP

BV-V150B-P

£40.67



1 1/2" DRYMATE BSP Female 316 S/S

DMD150-SS-BSP

£1,033.42



1 1/2" DRYMATE BSP Female Poly

DMD150-P-BSP

£185.00



1 1/2" DRYMATE BSP Male 316 S/S

DMA150-SS-BSP

£680.84



1 1/2" DRYMATE BSP Male Poly

DMA150-P-BSP

£173.09



1 1/2" DRYMATE NPT Female 316 S/S

DMD150-SS-NPT

£849.99



1 1/2" DRYMATE NPT Male 316 S/S

DMA150-SS-NPT

£560.00



1" DRYMATE BSP Female 316 S/S

DMD100-SS-BSP

£452.27



1" DRYMATE BSP Female 316 S/S EPDM

DMD100-SS-BSP-E

£452.27



Showing 24 products

Banjo Dry-Mate

Dry-Mate uses a ball valve design giving an unrestricted path for fluid flow. The handles on each half interlock, making it easy to identify which handle opens or closes first. The cam lever style of connection is the most recognised type of connection available. This offers an easy, quick and positive connection of the coupling halves. For safety the Dry-Mate has a number of features. Both handles have interlock buttons that prevent the ball valves from opening when the halves are separated. The Female part also has a locking yoke that locks the cam levers once the valve handle has been rotated to the open position. The gasket, which seals between the two halves, is mechanically held in place to ensure that it remains located when the halves are disconnected.

Where Can I Use Banjo Dry-Mate

The polypropylene version is designed for use with chemicals and the fitting is also very lightweight so it’s often found in the following industries and applications:

  • Agricultural
  • Industrial
  • Pharmaceutical
  • Chemical processing

How Can I Use Dry-Mate?  

Banjo Dry-Mate is a simple to use fitting with a unique design and operating system. The interlocking handles are designed so it’s easy to identify which handle opens or closes first. Both halves fit together, and closed with the levers for positive engagement. 

Safety Features:

  • Both handles have interlock buttons that prevent the ball valves from opening when the halves are separated.
  • The Female part also has a locking yoke that locks the cam levers once the valve handle has been rotated to the open position.
  • The gasket, which seals between the two halves, is mechanically held in place to ensure that it remains located when the halves are disconnected.
  • Light weight – great for applications where fittings are required to be moved about on a regular basis
  • Unrestricted flow  - no matter what size you order, the Dry-Mate has a virtually unrestricted flow due to the ball valve design so your work flow is never compromised by your fittings
  • Minimal fluid spill  - this fitting is a dry disconnect specially designed to prevent accidental spills or exposure
  • Easy to use – only two cam levers to connect or disconnect
  • Economical - the most cost effective fitting in the dry disconnect range
  • Reduces risk of exposure – ‘no spill’, solid and effective design
  • Wide range of chemical resistance – Polypropylene is compatible with a wide range of chemicals 
  • Cannot be uncoupled in the fully open position – peace of mind with safety

What Can I Expect from Banjo Dry-Mate?

  • Technical specifications stainless steel
  • Maximum working pressure:  100 PSI/7 Bar
  • Maximum temperature:  148degC at 70 PSI
  • Materials:  316 Stainless steel
  • Seals:  100% PTFE ball seats and seals
  • Face seals:  Viton, EPDM (Kalrez also available)
  • Size range:  1”, 1 ½ “, and 2”
  • End connections:  BSP or NPT Female
  • Technical Specification polypropylene
  • Maximum working pressure:  100 PSI/ 7 Bar
  • Maximum temperature:  65 deg C at 70 PSI
  • Materials:  Fibreglass reinforced polypropylene
  • Seals:  PTFE seats and Viton Seals
  • Face seals:  Viton, EPDM (Kalrez also available)
  • Size range:  1”, 1 ½ “, and 2”
  • End connections:  BSP or NPT Female

Associated Products

Banjo DryMate shouldn’t be used with gases or low flash point liquids. If your application demands either of these elements, try checking our DryLink range, Maxi-Dry or CleanBreaks – if you require any further advice on which dry break would be best for you, please call our experienced team who will be able to help you decipher based on your project spec. Call us on +44 (0)1235 512500

Additional Features

Please ask us if there is anything you need that you don’t find on our website. Some popular additional features include:

  • Comes complete with dust caps
  • Manifold connection is also available on request

Please ensure you are sufficiently trained to operate the product.

Please ensure you have all relevant safety documents provided with the product prior to use.

Please call us for any training and technical advice.